Rated 1 out of 5 by
Lance from
Not a durable product! I bought this item on 05/22/17 and used it on 05/23/17. The plastic bowl is not durable and ripped at the attachment hole. The hole saw is also the wrong diameter as others have stated, for a 6 inch recessed light I need a 6-3/8" hole saw as opposed to the supplied 6 or 6-1/2" options.
Date published: 2017-05-23
Rated 5 out of 5 by
Majik6033 from
Excellent tool All tools from time to time need different adjustments not all manufacturers can make special tools for all applications just do what I do and modify the tool. Just take a round file and elongate the hole to make the adjustment to a 6.25" or a 6.375" Think a little.
Date published: 2017-06-01
Rated 2 out of 5 by
remodel guy from
the drill bit was cheap the drill bit was so cheap it bent after the second hole. I straightened it out and re attached it, but it bent again and made a crooked hole. A stronger drill bit would be nice. I did find the calibration marking on the cutter usefull.
Date published: 2019-10-28
Rated 1 out of 5 by
William from
Poor Design Inadequate adjustments for diameters in increments less than 1/2"
Date published: 2017-01-18
Rated 1 out of 5 by
Lild1116 from
Bit bent I bought this and on the second hole the bit bend over.
Date published: 2021-01-13
Bazaarvoice SAP Hybris Integration Version 2.8.2
I need replacement blades. Where do I order them?
Asked by: Guadi
We do not sell replacement blades at this time.
Answered by: SW Tools
Date published: 2020-12-22
i was wondering if you sell replacement blades for this hole saw if so how much ?
Asked by: not me
We do not sell replacement blades at this time.
Answered by: Southwire
Date published: 2020-02-18
For those needing a 6-3/8" setting can a 1/16" washer be used as a blade spacer on the 6-1/4" setting, or is the groove too shallow?
Asked by: Dink
For us to better help you with your question please contact our team at 855-798-6657 and we will be happy to assist.
Answered by: SW Tools
Date published: 2019-08-28
What is the drill bit size, 3/16"?
Asked by: Dink
It has a 3/16 pilot bit with a 5/16 arbor bit.
Answered by: SW Tools
Date published: 2019-08-26
How do you mount the disc mandrel, stabilizer into the dust shield? The cutting blades don't extend past the shield.
Asked by: Ray B
1.) First insert Pilot Bit into disc mandrel. 2.) Screw the nut onto the bottom side of the pilot bit to secure the disc mandrel 3.) Place the mandrel into the dust shield bowl 4.) Insert the washer onto the pilot base bit from the bottom of the dust shield. 5.) Attach to Drill
Answered by: Southwire
Date published: 2019-08-20
Are there replacement blades and pilot bits for the adjustable hole saw
Asked by: Cutright18
Please contact our team at 855-798-6657 and we will be happy to assist!
Answered by: Southwire
Date published: 2019-01-21
I recently purchased this tool at Lowes. Why wouldn't you adjust the 2nd set of holes for the carbide cutters to allow for 1/4" adjustments in diameter. It allows for a 6" hole or a 6 1/2" hole. 6"" is too small & 6 1/2" is too large.
Asked by: William
We have a new version of this saw which will be adjustable in 1/4" increments that is coming our later this year!
Answered by: Southwire
Date published: 2018-12-04
I recently purchased a adjustable hole saw (ACLHS). I loosened the cutting blade mounting bracket to make a smaller hole and re-tighten the screws. One of the socket head screws stripped and I can no longer tighten blade mounting bracket. RETURN TO STORE?
Asked by: Repete
Please call our Tools Team at 855-798-6657 for further assistance!
Answered by: Southwire
Date published: 2018-11-19
Bazaarvoice SAP Hybris Integration Version 2.8.2
