Southwire’s 5KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. Ces câbles peuvent fonctionner en continu à une température de conducteur ne dépassant pas 105 °C pour un fonctionnement normal, 140 °C pour une surcharge d’urgence et 250 °C en des conditions de court-circuit. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. La jaquette en PVC intègre la technologie SIM et a un coefficient de friction COF de 0,2. Le câble peut être installé en conduit sans l’aide de lubrifiant. Classé pour 454 kg./Pression latérale maximale FT.
| Cond. Dimensions | Cond. Strands | Diameter Over Conductor (in) (cm) | Diameter Over Insulation (in) (cm) | Épaisseur de l’isolation (mils) (mm) | Diameter Over Shield (in) (cm) | Épaisseur de la jaquette (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | Max Pull Tension (lbs) (kg) | Min. Rayon de courbure (pouces) (centimètres) | Conduit Size (in) (cm) | |
| More Options |
2 AWG 2 AWG
|
7 7
|
0.268 0.68
|
0.536 1.36
|
115 2.92
|
0.640 1.63
|
55 1.40
|
0.790 2.01
|
342 509
|
398 180.53
|
9.4 23.88
|
2.5 6.35
|
| More Options |
1/0 AWG 1/0 AWG
|
10 10
|
0.336 0.85
|
0.604 1.53
|
115 2.92
|
0.664 1.69
|
55 1.40
|
0.814 2.07
|
377 561
|
633 287.12
|
9.7 24.64
|
2.5 6.35
|
| More Options |
2/0 AWG 2/0 AWG
|
12 12
|
0.376 0.96
|
0.644 1.64
|
115 2.92
|
0.704 1.79
|
80 2.03
|
0.884 2.25
|
446 664
|
798 361.97
|
10.6 26.92
|
2.5 6.35
|
| More Options |
4/0 AWG 4/0 AWG
|
19 19
|
0.474 1.20
|
0.743 1.89
|
115 2.92
|
0.803 2.04
|
80 2.03
|
0.983 2.50
|
569 847
|
1269 575.61
|
11.7 29.72
|
3.0 7.62
|
| More Options |
350 KCMIL 350 KCMIL
|
35 35
|
0.615 1.56
|
0.892 2.27
|
115 2.92
|
0.952 2.42
|
80 2.03
|
1.132 2.88
|
777 1156
|
2100 952.54
|
13.5 34.29
|
3.5 8.89
|
| More Options |
500 KCMIL 500 KCMIL
|
35 35
|
0.735 1.87
|
1.034 2.63
|
115 2.92
|
1.094 2.78
|
80 2.03
|
1.274 3.24
|
990 1473
|
3000 1360.78
|
15.2 38.61
|
3.5 8.89
|
| More Options |
750 KCMIL 750 KCMIL
|
58 58
|
0.908 2.31
|
1.206 3.06
|
115 2.92
|
1.266 3.22
|
80 2.03
|
1.446 3.67
|
1315 1957
|
4500 2041.16
|
17.3 43.94
|
4.0 10.16
|
| More Options |
1000 KCMIL 1000 KCMIL
|
58 58
|
1.060 2.69
|
1.044 2.65
|
115 2.92
|
1.104 2.80
|
80 2.03
|
1.598 4.06
|
1627 2421
|
6000 2721.55
|
19.1 48.51
|
4.5 11.43
|
* Strand count meets minimum number per ASTM
| Cond. Dimensions | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Capacitive Reactance (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Zero Sequence Impedance (ohms/1000') (ohms/1000') | Positive Sequence Impedance (ohms/1000') (ohms/1000') | Shield Short Circuit Current 6 Cycles | Allowable Ampacity In Duct 90C | Allowable Ampacity In Duct 105C | Allowable Ampacity In Air 90C | Allowable Ampacity In Air 105C | |
| More Options |
2 AWG 2 AWG
|
0.267 0.40
|
0.336 0.50
|
0.036 0.05
|
0.045 0.07
|
0.7 + j0.521 0.7 + j0.521
|
0.336 + j0.044 0.336 + j0.044
|
1877 1877
|
115 115
|
125 125
|
150 150
|
165 165
|
| More Options |
1/0 AWG 1/0 AWG
|
0.168 0.25
|
0.211 0.31
|
0.030 0.04
|
0.041 0.06
|
0.581 + j0.482 0.581 + j0.482
|
0.211 + j0.04 0.211 + j0.04
|
2088 2088
|
150 150
|
160 160
|
200 200
|
225 225
|
| More Options |
2/0 AWG 2/0 AWG
|
0.133 0.20
|
0.167 0.25
|
0.028 0.04
|
0.041 0.06
|
0.537 + j0.46 0.537 + j0.46
|
0.167 + j0.04 0.167 + j0.04
|
2212 2212
|
170 170
|
185 185
|
230 230
|
260 260
|
| More Options |
4/0 AWG 4/0 AWG
|
0.084 0.13
|
0.105 0.16
|
0.023 0.03
|
0.038 0.06
|
0.476 + j0.413 0.476 + j0.413
|
0.105 + j0.037 0.105 + j0.037
|
2515 2515
|
225 225
|
245 245
|
310 310
|
350 350
|
| More Options |
350 KCMIL 350 KCMIL
|
0.050 0.07
|
0.065 0.10
|
0.019 0.03
|
0.036 0.05
|
0.43 + j0.352 0.43 + j0.352
|
0.066 + j0.034 0.066 + j0.034
|
2977 2977
|
305 305
|
325 325
|
430 430
|
480 480
|
| More Options |
500 KCMIL 500 KCMIL
|
0.035 0.05
|
0.046 0.07
|
0.016 0.02
|
0.034 0.05
|
0.403 + j0.312 0.403 + j0.312
|
0.047 + j0.032 0.047 + j0.032
|
3349 3349
|
370 370
|
400 400
|
545 545
|
605 605
|
| More Options |
750 KCMIL 750 KCMIL
|
0.024 0.04
|
0.033 0.05
|
0.014 0.02
|
0.032 0.05
|
0.374 + j0.261 0.374 + j0.261
|
0.034 + j0.031 0.034 + j0.031
|
3916 3916
|
470 470
|
505 505
|
710 710
|
790 790
|
| More Options |
1000 KCMIL 1000 KCMIL
|
0.018 0.03
|
0.026 0.04
|
0.012 0.02
|
0.031 0.05
|
0.352 + j0.227 0.352 + j0.227
|
0.027 + j0.03 0.027 + j0.03
|
4387 4387
|
545 545
|
590 590
|
855 855
|
950 950
|
* NEC ampacities are based on:
* For Duct: Table 310.60(C)(12) Detail 1.
* For Free Air: Table 310.60(C)(4).
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
* Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft, Spacing: one diameter spacing center-to-center.
* Capacitive Reactance is between Phase-to-Shield.
