Les câbles 15 kV de Southwire conviennent pour une utilisation en zones humides et sèches, conduits, gaines, passages, chemins, enfouissement direct, et où des propriétés électriques supérieures sont désirées. Ces câbles peuvent fonctionner en continu à une température de conducteur ne dépassant pas 105 °C pour un fonctionnement normal, 140 °C pour une surcharge d’urgence et 250 °C en des conditions de court-circuit. Rated at -35°C for cold bend when UL listed. Rated at -40°C for cold bend and cold impact and marked with "LTGG" when CSA listed or dual UL/CSA listed. Pour une utilisation dans les endroits dangereux de catégorie I et II, Division 2 conformément aux articles 501 et 502.Classé pour 454 kg./Pression latérale maximale FT.
| Cond. Dimensions | Cond. Strands | Diameter Over Conductor (in) (cm) | Diameter Over Insulation (in) (cm) | Épaisseur de l’isolation (mils) (mm) | Diameter Over Shield (in) (cm) | Ground Size | Épaisseur de la jaquette (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | Max Pull Tension (lbs) (kg) | Min. Rayon de courbure (pouces) (centimètres) | |
| More Options |
2 AWG 2 AWG
|
7 7
|
0.282 0.72
|
0.755 1.92
|
220 5.59
|
0.815 2.07
|
1x6 1x6
|
110 2.79
|
2.032 5.16
|
2163 3219
|
1592 722.12
|
14.2 36.07
|
| More Options |
1/0 AWG 1/0 AWG
|
19 19
|
0.361 0.92
|
0.840 2.13
|
220 5.59
|
0.900 2.29
|
1x4 1x4
|
110 2.79
|
2.222 5.64
|
2870 4271
|
2534 1149.40
|
15.5 39.37
|
| More Options |
2/0 AWG 2/0 AWG
|
19 19
|
0.405 1.03
|
0.884 2.25
|
220 5.59
|
0.944 2.40
|
1x3 1x3
|
110 2.79
|
2.317 5.89
|
3297 4906
|
3194 1448.77
|
16.2 41.15
|
| More Options |
3/0 AWG 3/0 AWG
|
19 19
|
0.456 1.16
|
0.934 2.37
|
220 5.59
|
0.994 2.52
|
1x3 1x3
|
110 2.79
|
2.418 6.14
|
3738 5563
|
4027 1826.61
|
16.9 42.93
|
| More Options |
4/0 AWG 4/0 AWG
|
19 19
|
0.512 1.30
|
0.976 2.48
|
220 5.59
|
1.036 2.63
|
1x3 1x3
|
110 2.79
|
2.516 6.39
|
4300 6399
|
5078 2303.34
|
17.6 44.70
|
| More Options |
350 KCMIL 350 KCMIL
|
37 37
|
0.661 1.68
|
1.147 2.91
|
220 5.59
|
1.207 3.07
|
1x2 1x2
|
135 3.43
|
2.929 7.44
|
6211 9243
|
8400 3810.17
|
20.5 52.07
|
| More Options |
500 KCMIL 500 KCMIL
|
37 37
|
0.789 2.00
|
1.275 3.24
|
220 5.59
|
1.335 3.39
|
1x1 1x1
|
135 3.43
|
3.212 8.16
|
8056 11989
|
12000 5443.10
|
22.4 56.90
|
| Cond. Dimensions | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Capacitive Reactance (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Zero Sequence Impedance (ohms/1000') (ohms/1000') | Positive Sequence Impedance (ohms/1000') (ohms/1000') | Shield Short Circuit Current 6 Cycles | Allowable Ampacity In Duct 90C | Allowable Ampacity In Duct 105C | Allowable Ampacity In Air 90C | Allowable Ampacity In Air 105C | |
| More Options |
2 AWG 2 AWG
|
0.162 0.24
|
0.204 0.30
|
0.051 0.08
|
0.047 0.07
|
0.579 + j0.421 0.579 + j0.421
|
0.204 + j0.048 0.204 + j0.048
|
2571 2571
|
150 150
|
160 160
|
165 165
|
185 185
|
| More Options |
1/0 AWG 1/0 AWG
|
0.102 0.15
|
0.128 0.19
|
0.043 0.06
|
0.043 0.06
|
0.5 + j0.385 0.5 + j0.385
|
0.128 + j0.043 0.128 + j0.043
|
2816 2816
|
195 195
|
210 210
|
215 215
|
240 240
|
| More Options |
2/0 AWG 2/0 AWG
|
0.081 0.12
|
0.102 0.15
|
0.040 0.06
|
0.042 0.06
|
0.471 + j0.367 0.471 + j0.367
|
0.102 + j0.042 0.102 + j0.042
|
2952 2952
|
220 220
|
235 235
|
245 245
|
275 275
|
| More Options |
3/0 AWG 3/0 AWG
|
0.064 0.10
|
0.081 0.12
|
0.037 0.06
|
0.040 0.06
|
0.447 + j0.347 0.447 + j0.347
|
0.081 + j0.04 0.081 + j0.04
|
3110 3110
|
250 250
|
270 270
|
285 285
|
315 315
|
| More Options |
4/0 AWG 4/0 AWG
|
0.051 0.08
|
0.065 0.10
|
0.034 0.05
|
0.039 0.06
|
0.426 + j0.328 0.426 + j0.328
|
0.065 + j0.039 0.065 + j0.039
|
3284 3284
|
285 285
|
305 305
|
325 325
|
360 360
|
| More Options |
350 KCMIL 350 KCMIL
|
0.031 0.05
|
0.041 0.06
|
0.028 0.04
|
0.036 0.05
|
0.388 + j0.28 0.388 + j0.28
|
0.041 + j0.036 0.041 + j0.036
|
3770 3770
|
375 375
|
400 400
|
435 435
|
490 490
|
| More Options |
500 KCMIL 500 KCMIL
|
0.022 0.03
|
0.030 0.04
|
0.025 0.04
|
0.034 0.05
|
0.365 + j0.248 0.365 + j0.248
|
0.03 + j0.034 0.03 + j0.034
|
4167 4167
|
450 450
|
485 485
|
535 535
|
600 600
|
* NEC ampacities are based on:
* For Duct: Table 310.60(C)(13) Detail 1.
* For Free Air: Table 310.60(C)(5).
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
* Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft.
* Capacitive Reactance is between Phase-to-Shield.
