SPEC: 46502

CU Compressed 25kV NLEPR Insulation 133% IL Black SIM-PVC Jacket. MV 105 - Tray Rated - Sunlight Resistant - For Direct Burial

Type MV-105 Single Conductor Copper, 320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA

Télécharger les spécifications de la catégorie

Application & Features

Southwire’s 25KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial when installed with a grounding conductor in close proximity that conforms to NEC section 311.36 and 250.4(A)(5), and where superior electrical properties are desired. Ces câbles peuvent fonctionner en continu à une température de conducteur ne dépassant pas 105 °C pour un fonctionnement normal, 140 °C pour une surcharge d’urgence et 250 °C en des conditions de court-circuit. Rated at -35°C for cold bend when UL listed. Rated at -25°C for cold bend and cold impact and marked with "LTDD" when CSA listed or dual UL/CSA listed. La jaquette en PVC intègre la technologie SIM et a un coefficient de friction COF de 0,2. Le câble peut être installé en conduit sans l’aide de lubrifiant. Classé pour 454 kg./Pression latérale maximale FT.

Spécifications

Pour plus d’informations, sélectionnez un ensemble de produits ci-dessous :

	Cond. Dimensions	Cond. Strands	Diameter Over Conductor (in) (cm)	Diameter Over Insulation (in) (cm)	Épaisseur de l’isolation (mils) (mm)	Diameter Over Shield (in) (cm)	Épaisseur de la jaquette (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)	Max Pull Tension (lbs) (kg)	Min. Rayon de courbure (pouces) (centimètres)	Conduit Size (in) (cm)
More Options	1/0 AWG 1/0 AWG	19 19	0.361 0.92	1.040 2.64	320 8.13	1.100 2.79	80 2.03	1.280 3.25	1018 1515	844 382.83	15.3 38.86	4.0 10.16
More Options	2/0 AWG 2/0 AWG	19 19	0.405 1.03	1.084 2.75	320 8.13	1.144 2.91	80 2.03	1.324 3.36	1138 1694	1064 482.62	15.8 40.13	4.0 10.16
More Options	3/0 AWG 3/0 AWG	19 19	0.456 1.16	1.134 2.88	320 8.13	1.194 3.03	80 2.03	1.374 3.49	1286 1914	1342 608.72	16.4 41.66	4.0 10.16
More Options	4/0 AWG 4/0 AWG	19 19	0.512 1.30	1.176 2.99	320 8.13	1.236 3.14	80 2.03	1.416 3.60	1455 2165	1692 767.48	16.9 42.93	4.0 10.16
More Options	250 KCMIL 250 KCMIL	37 37	0.558 1.42	1.228 3.12	320 8.13	1.288 3.27	80 2.03	1.468 3.73	1618 2408	2000 907.18	17.6 44.70	4.5 11.43
More Options	300 KCMIL 300 KCMIL	37 37	0.610 1.55	1.297 3.29	320 8.13	1.357 3.45	80 2.03	1.537 3.90	1828 2720	2400 1088.62	18.4 46.74	4.5 11.43
More Options	350 KCMIL 350 KCMIL	37 37	0.661 1.68	1.327 3.37	320 8.13	1.387 3.52	80 2.03	1.567 3.98	2007 2987	2800 1270.06	18.8 47.75	4.5 11.43
More Options	500 KCMIL 500 KCMIL	37 37	0.789 2.00	1.452 3.69	320 8.13	1.512 3.84	110 2.79	1.752 4.45	2669 3972	4000 1814.37	21.0 53.34	5.0 12.70
More Options	600 KCMIL 600 KCMIL	61 61	0.865 2.20	1.562 3.97	320 8.13	1.622 4.12	110 2.79	1.862 4.73	3079 4582	4800 2177.24	22.3 56.64	5.5 13.97
More Options	750 KCMIL 750 KCMIL	61 61	0.968 2.46	1.664 4.23	320 8.13	1.724 4.38	110 2.79	1.964 4.99	3632 5405	6000 2721.55	23.5 59.69	5.5 13.97
More Options	1000 KCMIL 1000 KCMIL	61 61	1.117 2.84	1.813 4.61	320 8.13	1.873 4.76	110 2.79	2.113 5.37	4535 6749	8000 3628.74	25.3 64.26	6.0 15.24

* Conduit size based on 3 phase 40% fill-factor without ground

	Cond. Dimensions	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Capacitive Reactance (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Zero Sequence Impedance (ohms/1000') (ohms/1000')	Positive Sequence Impedance (ohms/1000') (ohms/1000')	Shield Short Circuit Current 6 Cycles	Allowable Ampacity In Duct 90C	Allowable Ampacity In Duct 105C	Allowable Ampacity In Air 90C	Allowable Ampacity In Air 105C
More Options	1/0 AWG 1/0 AWG	0.102 0.15	0.128 0.19	0.055 0.08	0.051 0.08	0.483 + j0.322 0.483 + j0.322	0.129 + j0.051 0.129 + j0.051	3435 3435	200 200	215 215	260 260	290 290
More Options	2/0 AWG 2/0 AWG	0.081 0.12	0.102 0.15	0.051 0.08	0.049 0.07	0.453 + j0.308 0.453 + j0.308	0.103 + j0.049 0.103 + j0.049	3572 3572	230 230	245 245	300 300	330 330
More Options	3/0 AWG 3/0 AWG	0.064 0.10	0.081 0.12	0.047 0.07	0.047 0.07	0.428 + j0.292 0.428 + j0.292	0.082 + j0.047 0.082 + j0.047	3730 3730	260 260	275 275	345 345	380 380
More Options	4/0 AWG 4/0 AWG	0.051 0.08	0.065 0.10	0.044 0.07	0.045 0.07	0.406 + j0.277 0.406 + j0.277	0.066 + j0.046 0.066 + j0.046	3903 3903	295 295	315 315	395 395	445 445
More Options	250 KCMIL 250 KCMIL	0.043 0.06	0.056 0.08	0.041 0.06	0.044 0.07	0.392 + j0.263 0.392 + j0.263	0.057 + j0.044 0.057 + j0.044	4071 4071	325 325	345 345	440 440	490 490
More Options	300 KCMIL 300 KCMIL	0.036 0.05	0.047 0.07	0.039 0.06	0.043 0.06	0.378 - j0.022 0.378 - j0.022	0.048 - j0.23 0.048 - j0.23	4232 4232	357 357	380 380
More Options	350 KCMIL 350 KCMIL	0.031 0.05	0.041 0.06	0.037 0.06	0.042 0.06	0.367 + j0.239 0.367 + j0.239	0.042 + j0.042 0.042 + j0.042	4390 4390	390 390	415 415	545 545	605 605
More Options	500 KCMIL 500 KCMIL	0.022 0.03	0.030 0.04	0.032 0.05	0.040 0.06	0.343 + j0.214 0.343 + j0.214	0.031 + j0.04 0.031 + j0.04	4786 4786	465 465	500 500	680 680	755 755
More Options	600 KCMIL 600 KCMIL	0.018 0.03	0.026 0.04	0.030 0.04	0.039 0.06	0.331 + j0.198 0.331 + j0.198	0.027 + j0.039 0.027 + j0.039	5053 5053	505 505	544 544	765 765	841 841
More Options	750 KCMIL 750 KCMIL	0.014 0.02	0.023 0.03	0.028 0.04	0.038 0.06	0.318 + j0.183 0.318 + j0.183	0.024 + j0.038 0.024 + j0.038	5372 5372	565 565	610 610	870 870	970 970
More Options	1000 KCMIL 1000 KCMIL	0.011 0.02	0.019 0.03	0.025 0.04	0.036 0.05	0.3 + j0.163 0.3 + j0.163	0.02 + j0.036 0.02 + j0.036	5834 5834	640 640	690 690	1040 1040	1160 1160

* NEC ampacities are based on:
* For Duct: Table 310.60(C)(11) Detail 1.
* For Free Air: Table 310.60(C)(3).
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
* Sequence Impedance values are based on Rho Earth Resistivity: 100 Ohm-Meter/1000ft, Spacing: one diameter spacing center-to-center..
* Capacitive Reactance is between Phase-to-Shield.

Normes et références

ASTM B3 Soft or Annealed Copper Wire
Conducteurs en cuivre toronné à couche concentrique ASTM B8
Spécification ASTM B33 relative au fil de cuivre étamé mou ou recuit
UL 1072 Câbles d’alimentation à moyen voltage
UL 1685 FT4 Test de propagation des flammes et émission de fumées sur chemin vertical (1/0 et plus grands)
CSA C22.2 N° 230 Chemins de câble TC-ER (1/0 AWG et plus grands)
CSA C22.2 N° 2556 / UL 2556 Méthodes de test des câbles
CSA C68.10 Câbles d’alimentation blindés pour application commerciales et industrielles de 5 à 46 KV
ICEA S-93-639 (NEMA WC 74) Câbles d’alimentation blindés de 5 à 46 KV
Norme ICEA S-97-682 pour les câbles utilitaires blindés ayant des tensions nominales de 5 à 46 kV
IEEE 1202 FT4 Test de résistance aux flammes (70 000 Btu/h) sur chemin de câbles vertical (1/0 et plus grands)
AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV (Qualification Test Requirements)
FABRIQUÉ AUX ÉTATS-UNIS : Compliant with both Buy American and Buy America Act (BAA) requirements per 49 U.S.C. § 5323(j) and the Federal Transit Administration Buy America requirements per 49 C.F.R. part 661

Construction

Conducteur : Class B compressed stranded bare copper per ASTM B3 and ASTM B8 (Tinned Copper per ASTM B33 optional)
Conductor Shield: Semi-conducting cross-linked copolymer
Isolation : 320 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Overall Jacket: Chlorure de polyvinyle (PVC)

Ressources

Il n’existe aucune ressource téléchargeable pour ce produit.