RHINOPOWERTM Type MP-GC mine power feeder cable is a heavy-duty power cable for use in stationary horizontal HV mine power distribution circuits, for permanent or semi-portable applications with power transmission in deep mines, surface mines, open pits, tunnels, in conduit or duct (not to exceed max rated voltage), and suitable for direct burial in wet or dry locations. Veuillez consulter un spécialiste en installation d’usine pour les exigences relatives aux chutes verticales.
| Cond. Dimensions | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Épaisseur de l’isolation (mils) (mm) | Diameter Over Insulation (in) (cm) | Ground Check Size | Épaisseur de la jaquette (mils) (mm) | Approx. OD (in) (cm) | Approx. Weight (lbs/1000') (kgs/km) | |
| More Options |
2 AWG 2 AWG
|
3 3
|
7 7
|
0.268 0.68
|
175 4.45
|
0.648 1.65
|
8 8
|
145 3.68
|
1.952 4.96
|
2080 3095
|
| More Options |
2/0 AWG 2/0 AWG
|
3 3
|
19 19
|
0.376 0.96
|
175 4.45
|
0.756 1.92
|
8 8
|
140 3.56
|
2.150 5.46
|
3090 4598
|
| More Options |
4/0 AWG 4/0 AWG
|
3 3
|
19 19
|
0.474 1.20
|
175 4.45
|
0.855 2.17
|
8 8
|
150 3.81
|
2.400 6.10
|
3540 5268
|
* Strand count meets minimum number per ASTM
| Cond. Dimensions | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Capacitive Reactance (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Puissance nominale (lbs) (kg) | Min. Rayon de courbure (pouces) (centimètres) | Allowable Ampacity In Air 90C | |
| More Options |
2 AWG 2 AWG
|
0.162 0.24
|
0.204 0.30
|
0.060 0.09
|
0.042 0.06
|
453 205.48
|
23.4 59.44
|
164 164
|
| More Options |
2/0 AWG 2/0 AWG
|
0.081 0.12
|
0.102 0.15
|
0.047 0.07
|
0.038 0.06
|
910 412.77
|
25.8 65.53
|
246 246
|
| More Options |
4/0 AWG 4/0 AWG
|
0.051 0.08
|
0.065 0.10
|
0.040 0.06
|
0.035 0.05
|
1447 656.35
|
28.8 73.15
|
325 325
|
* Ampacities based upon ICEA S-75-381 Table I-1.
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.
