SPEC: 47802

3/C CU 5KV 100% & 133% XLP/PVC RHINOPOWER^TM Type MP-GC. Approuvé MSHA

Conducteurs en cuivre de catégorie B, polyéthylène réticulaire (XLP) avec niveau d’isolation à 100 % et 133 %, ruban de blindage en cuivre, jaquette en polyvinyle chloré (PVC), 90 °C

Télécharger les spécifications de la catégorie

Application & Features

RHINOPOWER^TM Type MP-GC mine power feeder cable is a heavy-duty power cable for use in stationary horizontal HV mine power distribution circuits, for permanent or semi-portable applications with power transmission in deep mines, surface mines, open pits, tunnels, in conduit or duct (not to exceed max rated voltage), and suitable for direct burial in wet or dry locations. Veuillez consulter un spécialiste en installation d’usine pour les exigences relatives aux chutes verticales.

Spécifications

Pour plus d’informations, sélectionnez un ensemble de produits ci-dessous :

	Cond. Dimensions	Conductor Number	Cond. Strands	Diameter Over Conductor (in) (cm)	Épaisseur de l’isolation (mils) (mm)	Diameter Over Insulation (in) (cm)	Ground Check Size	Épaisseur de la jaquette (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)
More Options	4 AWG 4 AWG	3 3	7 7	0.212 0.54	90 2.29	0.440 1.12	8 8	110 2.79	1.320 3.35	1158 1723
More Options	2 AWG 2 AWG	3 3	7 7	0.268 0.68	90 2.29	0.478 1.21	8 8	115 2.92	1.565 3.98	1686 2509
More Options	1 AWG 1 AWG	3 3	19 19	0.298 0.76	90 2.29	0.506 1.29	8 8	110 2.79	1.530 3.89	1779 2647
More Options	1/0 AWG 1/0 AWG	3 3	19 19	0.336 0.85	90 2.29	0.546 1.39	8 8	160 4.06	1.630 4.14	2149 3198

* Strand count meets minimum number per ASTM

	Cond. Dimensions	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Capacitive Reactance (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Puissance nominale (lbs) (kg)	Min. Rayon de courbure (pouces) (centimètres)	Allowable Ampacity In Air 90C
More Options	4 AWG 4 AWG	0.258 0.38	0.325 0.48	0.049 0.07	0.038 0.06	285 129.27	15.8 40.13	122 122
More Options	2 AWG 2 AWG	0.162 0.24	0.204 0.30	0.039 0.06	0.035 0.05	453 205.48	18.7 47.50	159 159
More Options	1 AWG 1 AWG	0.128 0.19	0.162 0.24	0.036 0.05	0.034 0.05	572 259.45	18.3 46.48	184 184
More Options	1/0 AWG 1/0 AWG	0.102 0.15	0.128 0.19	0.033 0.05	0.033 0.05	722 327.49	19.5 49.53	211 211

* Ampacities based upon ICEA S-75-381 Table I-1.
* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Normes et références

ASTM B3 Soft or Annealed Copper Wire
Conducteurs en cuivre toronné à couche concentrique ASTM B8
ASTM B496 Cuivre rond compact concentrique standard
ICEA S-75-381 Câbles d’alimentation et portables à utiliser dans les mines
Approuvé MSHA

Construction

Conducteur : Class B compact stranded bare copper per ASTM B3 and ASTM B496
Conductor Shield: Semi-conducting cross-linked copolymer
Isolation : Cross-Linked Polyethylene (XLP) 100% and 133% Insulation Level
Insulation Shield: Strippable semi-conducting cross-linked copolymer
Copper Tape Shield: Helically wrapped 5 mil copper tape with 25% overlap
Grounding Conductors: Two Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Ground Check: Class B compressed stranded bare copper per ASTM B3 and ASTM B8 with yellow high strength, polypropylene insulation
Enduit : Rubber Fillers as needed
Reinforcement: Tape and Reinforcing twine applied over the core for improved mechanical integrity and ease of stripping
Jaquette : Black Polyvinyl Chloride (PVC). Alternate jacket colors available.
Reflective Stripe: Highly visible reflective stripe embedded into the outer jacket to increase safety and help prevent cable runover (optional, contact your sales representative for part number)

Ressources

Il n’existe aucune ressource téléchargeable pour ce produit.

3/C CU 5KV 100% & 133% XLP/PVC RHINOPOWERTM Type MP-GC. Approuvé MSHA