Southwire’s 2000 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. Ces câbles peuvent fonctionner en continu à une température de conducteur ne dépassant pas le 90 °C pour un fonctionnement normal dans des conditions humides ou sèches, 130 °C pour une surcharge d’urgence et 250 °C en des conditions de court-circuit.
| Cond. Dimensions | Conductor Number | Cond. Strands | Diameter Over Conductor (in) (cm) | Épaisseur de l’isolation (mils) (mm) | Approx. OD (in) (cm) | Copper Weight (lbs/1000') (kgs/km) | Approx. Weight (lbs/1000') (kgs/km) | |
| More Options |
500 KCMIL 500 KCMIL
|
1 1
|
37 37
|
0.789 2.00
|
105 2.67
|
0.986 2.50
|
1543 2296
|
1748 2601
|
| More Options |
750 KCMIL 750 KCMIL
|
1 1
|
61 61
|
0.968 2.46
|
120 3.05
|
1.220 3.10
|
2315 3445
|
2569 3823
|
| Cond. Dimensions | Conductor Number | Min. Rayon de courbure (pouces) (centimètres) | Max Pull Tension (lbs) (kg) | DC Resistance at 25C (ohms/1000') (ohms/km) | AC Resistance at 75C (ohms/1000') (ohms/km) | Inductive Reactance (ohms/1000') (ohms/km) | Allowable Ampacity Raceway 75C | Allowable Ampacity Raceway 90C | |
| More Options |
500 KCMIL 500 KCMIL
|
1 1
|
3.9 9.91
|
4000 1814.37
|
0.022 0.03
|
0.029 0.04
|
0.039 0.06
|
380 380
|
430 430
|
| More Options |
750 KCMIL 750 KCMIL
|
1 1
|
6.1 15.49
|
6000 2721.55
|
0.014 0.02
|
0.022 0.03
|
0.038 0.06
|
475 475
|
535 535
|
* Ampacities based upon 2023 NEC Table 310.16. See NEC sections 310.15 and 110.14(C) for additional requirements.
* Inductive Reactance is based on non-ferrous conduit with one diameter spacing center-to-center.
