SPEC: 25030

CSA TECK 90 CU 3/C 5000V NON-SHIELDED EPR POWER CABLE

5000V, Non-Shielded, EPR Insulated, FT4, -40°C, HL (Hazardous Locations), AG14 & 90°C

Télécharger les spécifications de la catégorie

Application & Features

Southwire’s 5KV TECK 90, 5000V, non-shielded, EPR insulated power cable is a CSA approved armoured cable for industrial and commercial medium voltage applications. FT4, -40°C, HL, AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and is concrete encaseable.

-40°C - CSA Cold Bend and Impact Temperature
-25°C - Min. Installation Temperature
90°C - Max. Continuous Operating Temperature
140°C for Emergency Overload Temperature
250°C for Short Circuit Temperature

Spécifications

Pour plus d’informations, sélectionnez un ensemble de produits ci-dessous :

	Cond. Dimensions	Cond. Strands	Diameter Over Conductor (in) (cm)	Épaisseur de l’isolation (mils) (mm)	Ground Size	Inner Jacket Thickness (mils) (mm)	Diameter Over Armor (in) (cm)	Épaisseur de la jaquette (mils) (mm)	Approx. OD (in) (cm)	Approx. Weight (lbs/1000') (kgs/km)	Max Pull Tension (lbs) (kg)	Min. Rayon de courbure (pouces) (centimètres)
More Options	2 AWG 2 AWG	7 7	0.282 0.72	90 2.29	1x6 1x6	85 2.16	1.585 4.03	55 1.40	1.695 4.31	1541 2293	1592 722.12	11.8 29.97
More Options	1 AWG 1 AWG	19 19	0.322 0.82	90 2.29	1x6 1x6	85 2.16	1.682 4.27	55 1.40	1.792 4.55	1788 2661	2008 910.81	12.5 31.75
More Options	1/0 AWG 1/0 AWG	19 19	0.361 0.92	90 2.29	1x6 1x6	85 2.16	1.768 4.49	55 1.40	1.878 4.77	2055 3058	2534 1149.40	13.1 33.27
More Options	2/0 AWG 2/0 AWG	19 19	0.405 1.03	90 2.29	1x6 1x6	85 2.16	1.874 4.76	55 1.40	1.984 5.04	2439 3630	3194 1448.77	13.8 35.05
More Options	3/0 AWG 3/0 AWG	19 19	0.456 1.16	90 2.29	1x4 1x4	85 2.16	1.982 5.03	55 1.40	2.092 5.31	2894 4307	4027 1826.61	14.6 37.08
More Options	4/0 AWG 4/0 AWG	19 19	0.512 1.30	90 2.29	1x4 1x4	115 2.92	2.135 5.42	55 1.40	2.245 5.70	3501 5210	5078 2303.34	15.7 39.88
More Options	250 KCMIL 250 KCMIL	37 37	0.558 1.42	90 2.29	1x4 1x4	115 2.92	2.248 5.71	55 1.40	2.358 5.99	3959 5892	6000 2721.55	16.5 41.91
More Options	350 KCMIL 350 KCMIL	37 37	0.661 1.68	90 2.29	1x3 1x3	115 2.92	2.505 6.36	65 1.65	2.637 6.70	5196 7732	8400 3810.17	18.4 46.74
More Options	500 KCMIL 500 KCMIL	37 37	0.789 2.00	90 2.29	1x3 1x3	115 2.92	2.731 6.94	65 1.65	2.863 7.27	6806 10128	12000 5443.10	20.0 50.80

* Other conductor sizes and outer jacket colours are available upon request. (#s in brackets represent # of strands / conductor. Number of strands may vary as per CSA standard.)

	Cond. Dimensions	DC Resistance at 25C (ohms/1000') (ohms/km)	AC Resistance at 75C (ohms/1000') (ohms/km)	Inductive Reactance (ohms/1000') (ohms/km)	Allowable Ampacity In Air 90C
More Options	2 AWG 2 AWG	0.162 0.24	0.195 0.29	0.035 0.05	172 172
More Options	1 AWG 1 AWG	0.128 0.19	0.154 0.23	0.034 0.05	197 197
More Options	1/0 AWG 1/0 AWG	0.102 0.15	0.122 0.18	0.033 0.05	225 225
More Options	2/0 AWG 2/0 AWG	0.081 0.12	0.097 0.14	0.032 0.05	260 260
More Options	3/0 AWG 3/0 AWG	0.064 0.10	0.078 0.12	0.031 0.05	297 297
More Options	4/0 AWG 4/0 AWG	0.051 0.08	0.062 0.09	0.030 0.04	342 342
More Options	250 KCMIL 250 KCMIL	0.043 0.06	0.053 0.08	0.030 0.04	376 376
More Options	350 KCMIL 350 KCMIL	0.031 0.05	0.039 0.06	0.028 0.04	460 460
More Options	500 KCMIL 500 KCMIL	0.022 0.03	0.029 0.04	0.027 0.04	556 556

* Inductive impedance is based on non-ferrous conduit with one diameter spacing center-to-center.

Normes et références

ASTM B3 Soft or Annealed Copper Wire
Conducteurs en cuivre toronné à couche concentrique ASTM B8
CSA C22.2 No. 174 Cables in Hazardous Locations
CSA C22.2 No. 131 Type TECK 90 Cable
CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA HL - for Hazardous Locations rating
CSA SUN RES - for Sunlight Resistant rating
CSA AG14 - Acid Gas Compliance
ICEA S-96-659 (NEMA WC 71) 2001-5000 V Câbles non-blindés
Test de résistance aux flammes IEEE 383 (70 000 btu)
Test de résistance aux flammes sur chemin de câbles vertical IEEE 1202 FT4 (70 000 Btu/h)
FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

Construction

Conducteur : Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
Conductor Shield: Extruded semi-conducting thermosetting polymeric layer
Isolation : No-Lead EPR (ethylene propylene rubber), Thickness: 0.090” (2.3 mm) - nominal, 90°C
Grounding Conductor: Class B compressed or compact stranded bare copper, in accordance with ASTM B3 and B8
Liaison/attache : Polypropylene tape
Inner Jacket: Black PVC, Thickness: No. 2 AWG to No. 3/0 AWG = 0.080” (2.0 mm); No. 4/0 AWG to 500 kcmil = 0.110” (2.8 mm); 750 kcmil to 1000 kcmil = 0.140” (3.6 mm)
Armor: Aluminum Interlocked Armour (AIA)
Overall Jacket: Orange PVC (optional colours available), Thickness: No. 2 AWG to 250 kcmil = 0.060” (1.5 mm); 350 kcmil to 750 kcmil = 0.075” (1.9 mm); 1000 kcmil = 0.090” (2.3 mm)

Ressources

Il n’existe aucune ressource téléchargeable pour ce produit.