2-7 3/C CU EPR TECK90 5KV N/S AIA ORANGE PVC JKT

N° Southwire : 56846799

Contactez-nous

Télécharger les spécifications de la catégorie

PDF Tableau Excel

Sélectionnez les spécifications du produit

Construction

Couleur de la jaquette externe / l’armure

ORANGE

Format

Application & Features

Southwire’s 5KV TECK 90, 5000V, non-shielded, EPR insulated power cable is a CSA approved armoured cable for industrial and commercial medium voltage applications. FT4, -40°C, HL, AG14 and 90°C rated for use in harsh Canadian environments. Rated for installation in cable trays, duct banks, direct burial, troughs, hazardous locations, continuous rigid cable supports, and is concrete encaseable.

-40°C - CSA Cold Bend and Impact Temperature
-25°C - Min. Installation Temperature
90°C - Max. Continuous Operating Temperature
140°C for Emergency Overload Temperature
250°C for Short Circuit Temperature

Spécifications

Cond. Taille	Calibre 2 AWG Calibre 2 AWG
Cond. Strands	7 7
Diameter Over Conductor (po) (cm)	0.282 0.72	po cm
Épaisseur de l’isolation (mils) (mm)	90 2.29	mils mm
Ground Size	1x6 1x6
Inner Jacket Thickness (mils) (mm)	85 2.16	mils mm
Diameter Over Armor (po) (cm)	1.585 4.03	po cm
Épaisseur de la jaquette (mils) (mm)	55 1.40	mils mm
Approx. OD (po) (cm)	1.695 4.31	po cm
Approx. Poids (lbs/1 000 pi) (kg/km)	1541 2293	lbs/1 000 pi kg/km
Max Pull Tension (lbs) (kg)	1592 722.12	lbs kg
Min. Rayon de pliage (po) (cm)	11.8 29.97	po cm

* Other conductor sizes and outer jacket colours are available upon request. (#s in brackets represent # of strands / conductor. Number of strands may vary as per CSA standard.)

Normes et références

ASTM B3 Soft or Annealed Copper Wire
Conducteurs en cuivre toronné à couche concentrique ASTM B8
CSA C22.2 No. 174 Cables in Hazardous Locations
CSA C22.2 No. 131 Type TECK 90 Cable
CSA C22.2 No. 2556 & No. 0.3 Wire and Cable Test Methods
CSA LTGG [-40°C] - as per C68.10 - for Cold Bend and Impact rating
CSA HL - for Hazardous Locations rating
CSA SUN RES - for Sunlight Resistant rating
CSA AG14 - Acid Gas Compliance
ICEA S-96-659 (NEMA WC 71) 2001-5000 V Câbles non-blindés
Test de résistance aux flammes IEEE 383 (70 000 btu)
Test de résistance aux flammes sur chemin de câbles vertical IEEE 1202 FT4 (70 000 Btu/h)
FT1 Flame Test (1,706 BTU/Hr nominal - Vertical Wire Flame Test)

Construction

Conducteur : Class B stranded copper, compressed or compact, in accordance with ASTM B3 and B8.
Conductor Shield: Extruded semi-conducting thermosetting polymeric layer
Isolation : No-Lead EPR (ethylene propylene rubber), Thickness: 0.090” (2.3 mm) - nominal, 90°C
Grounding Conductor: Class B compressed or compact stranded bare copper, in accordance with ASTM B3 and B8
Liaison/attache : Polypropylene tape
Inner Jacket: Black PVC, Thickness: No. 2 AWG to No. 3/0 AWG = 0.080” (2.0 mm); No. 4/0 AWG to 500 kcmil = 0.110” (2.8 mm); 750 kcmil to 1000 kcmil = 0.140” (3.6 mm)
Armor: Aluminum Interlocked Armour (AIA)
Overall Jacket: Orange PVC (optional colours available), Thickness: No. 2 AWG to 250 kcmil = 0.060” (1.5 mm); 350 kcmil to 750 kcmil = 0.075” (1.9 mm); 1000 kcmil = 0.090” (2.3 mm)

Ressources

Il n’existe aucune ressource téléchargeable pour ce produit.