SPEC: 45154

18-7 6/C CU TFN/PVC BLACK/RED/WHITE/GREEN/BROWN/BLUE TYPE TC-ER 600V BLACK 1000 FT

N° Southwire : 57788802

Télécharger les spécifications de la catégorie
PDF Tableau Excel
Sélectionnez les spécifications du produit
Construction
Couleur de la jaquette externe / l’armure
NOIR
Format

Application & Features

Southwire’s Type TC-ER, PLTC, FPL, and NFPL Control Cable are suited for use in dry and wet areas, troughs, trays, direct burial and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C in dry locations, 105°C for emergency overload, and 250°C For uses in Class I, II, and III per NEC Article 725 and 760. Les constructions UL avec 3 conducteurs ou plus sont homologuées pour les circuits exposés (TC-ER) conformément à l’article 336.10 du NEC. Résistant au soleil et au pétrole

Spécifications

Cond. Taille Calibre 18 AWG Calibre 18 AWG
Conductor Number 6 6
Cond. Strands 7 7
Épaisseur de l’isolation (mils) (mm) 15 0.38 mils mm
Épaisseur de la jaquette (mils) (mm) 45 1.14 mils mm
Approx. OD (po) (cm) 0.365 0.93 po cm
Copper Weight (lbs/1 000 pi) (kg/km) 33 49 lbs/1 000 pi kg/km
Approx. Poids (lbs/1 000 pi) (kg/km) 81 121 lbs/1 000 pi kg/km
DC Resistance at 25C (ohms/305 m) (ohms/km) 6.669 9.92 ohms/305 m ohms/km
AC Resistance at 75C (ohms/305 m) (ohms/km) 8.035 11.96 ohms/305 m ohms/km
Min. Rayon de pliage (po) (cm) 1.5 3.81 po cm
Allowable Ampacity Raceway 75C - -
Allowable Ampacity Raceway 90C 11 11

* Ampacities based upon 2023 NEC Table 310.16 and do not take into account the overcurrent protection limitations in NEC 240.4(D) of 15 Amps for 14 AWG CU, 20 Amps for 12 AWG CU, and 30 Amps for 10 AWG CU (independent of the conductor temperature rating and stranding if size is present in table). Also, see NEC sections 310.15 and 110.14(C) for additional requirements.
* Ampacities have been adjusted for more than Three Current-Carrying Conductors.

Normes et références

  • ASTM B3 Soft or Annealed Copper Wire
  • Conducteurs en cuivre toronné à couche concentrique ASTM B8
  • UL 13 Power-Limited Circuit Cables
  • UL 66 Fixture Wire
  • UL 1277 TC-ER
  • UL 1685 Test de propagation des flammes et émission de fumées sur chemin vertical
  • Norme ICEA S-73-532 pour les câbles de contrôle, d’extension thermocouple et d’instrumentation
  • ICEA S-95-658 (NEMA WC70) Câbles d’alimentation à utiliser sous 2 000 volts ou moins pour la distribution d’électricité
  • EPA 40 CFR, Partie 26, Métaux lourds de la sous-partie C du tableau 1, méthode TCLP

Construction

  1. Conducteur : 7 strands class B compressed bare copper per ASTM B3 and ASTM B8
  2. Isolation : Polyvinyl Chloride (PVC) with nylon layer TFN, 19 Mils thick for 18 and 16
  3. Drain Wire: Cuivre étamé
  4. Blindage : 100% coverage aluminum foil
  5. Jaquette : Polyvinyl Chloride (PVC) Jacket

Ressources

Il n’existe aucune ressource téléchargeable pour ce produit.
Powered by Translations.com GlobalLink Web Software